Pipes, Valves, Flanges, Fittings, Welding Equipment, Welding Automation, Sprinkler Systems, Deluge Systems, Fire Pump Sets, Hydrant, Hose Reels & Hose Racks, Portable Extingui
You are viewing an unstyled version of this page. Either your browser does not support Cascading Style Sheets (CSS) or CSS styling has been disabled.
100 Series Plug-in Smoke Detector

Zoom

Category: Conventional Detectors
Manufacturer: SYSTEM SENSOR
SKU: 03015
Models
Quantity:

Model 2151 (photoelectric sensor) and model 2151T (photoelectric sensor with thermal) can be used with a variety of adapter bases in several wiring configurations and voltages. Other features include: low current draw, stable performance in high air velocities, built-in tamper resistant base design, remote LED option, removable cover and built-in test switch.
The 100 series is designed to meet the performance criteria designated by UL. The sensing chamber is sealed against back pressure air flow. The chamber top is covered by a one piece molded screen which minimizes the entry of dirt and insects. This screen can be removed for cleaning.




100 Series Plug-in Smoke Detector Specifications
1. Operating Voltage/Alarm Current
2. Standby Current: 120μA Standby
3. Sensitivity: 1 - 3.18%/ft.
4. Height: 2.0” in B401
5. Diameter: 4.1” installed in B401; 6.2” installed in B110LP
6. Shipping Weight: 5.2 oz
7. Construction: Flame retardant thermoplastic
8. Temperature: Photo: 32°F to 120°F (0°C to 49°C); Photo/Thermal: 32°F to 100°F (0° to 38°C)
9. UL Listed Velocity Range: Photo: 0–3000 fpm (0–15.2 m/s)
10. Humidity Range: 10%–93% RH non-condensing
11. Smoke Detector Spacing: On smooth ceilings (as defined in NFPA 72), spacing of 30 feet (900 sq. ft.) may be
used as a guide. Other spacing may be used depending on ceiling height, high air movements, and other conditions or response requirements.
Agency Listings and Approvals
These listings and approvals apply to the  modules
specified in this document. In some cases, certain
modules or applications may not be listed by
certain  approval agencies, or listing may be in process. Consult factory for latest listing status.
• UL Listed: S911
• ULC Listed: CS308
• CSFM: 7272-1653:122
• FM Approved
• MEA Approved: 205-94-E
• Maryland State Fire Marshal: #2180



Part No. Description 
2151 Low-profile photoelectric detector. Must be mounted to one of the B100 Series or B400 Series bases listed in the Adapter Base Selection Guide. 
2151T Low-profile photoelectric detector with thermal. Must be mounted to one of the B100 Series or B400 Series bases listed in the Adapter Base 




This information is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice.

Products

Registered Users
New user? click HERE