Pipes, Valves, Flanges, Fittings, Welding Equipment, Welding Automation, Sprinkler Systems, Deluge Systems, Fire Pump Sets, Hydrant, Hose Reels & Hose Racks, Portable Extingui
You are viewing an unstyled version of this page. Either your browser does not support Cascading Style Sheets (CSS) or CSS styling has been disabled.
FSI-851 Series Intelligent Plug-In Ionization Smoke Detector

Zoom

Category: Addressable Detectors
Manufacturer: NOTIFIER
SKU: 03023
Quantity:


FSI-851 Series intelligent plug-in ion detectors with integral communication has features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector locations for selective maintenance when chamber contamination reaches an unacceptable level.
 
The FSI-851 Series ionization detector incorporates a unique single-source, dual-chamber design to respond quickly and dependably to a broad range of fires. FSI-851 Series detectors are compatible with ONYX series and CLIP series intelligent Fire Alarm Control Panels (FACPs).


Specifications
Size: 2.0" (51 mm) high x 4.1" (10.4 cm) diameter installed in B501 base, 6.1" (15.5 cm) diameter installed in B710LP base.
Shipping Weight: 5.4 oz. (153 g).
Operating Temperature: 0°C to 49°C (32°F to 120°F).
UL/ULC-Listed Velocity Range: ION: 0 – 1200 ft./min. (365.76 m/min.).
Relative Humidity: 10% – 93% noncondensing.
 
Agency Listings and Approvals
UL Listed: S1115
ULC Listed: CS308 (FSI-851A)
CSFM: 7271-0028:201
Maryland State Fire Marshal: Permit #2140
BSMI: CI313066760014
Lloyd’s Register: 03/60011
U.S. Coast Guard: 161.002/23/3 (AFP-200); 161.002/27/3 (AFP1010/AM2020); 161.002/42/1 (NFS-640)
• FM Approved
 



Model No. Description 
FSI-851 Low-profile intelligent ionization sensor. Must be mounted to one of the bases listed below.
FSI-851A Same as above but with ULC Listing.



This information is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice.

Products

Registered Users
New user? click HERE